12E5119 Instruction Manual QuickTOC
®
ultra
IECEx 149
7 How to Work with the Analyser
7.11 Database
LAR | PROCESS ANALYSERS AG
7.11.1.1 Single view of the measured value (Info)
In the single view of the measured value, results of individual measurements as well as the results of the
repeated measurements and the calculated average value can be viewed on the left side of the display.
On the right side, the waveforms associated with the measured value are graphically displayed.
Fig. 108: Single view of the measured value (Example)
Notice
This view supports the zoom funcionality (Chapter 7.14.1 on page 155).
About 200 signal curves are stored. For results that were previously detected,
no more curves are displayed.
i
To Next Page
Loading...