56 Instruction Manual QuickTOC
®
ultra
IECEx 12E5119
4 Installation
4.10 Provide Calibration Standards LAR | PROCESS ANALYSERS AG
4.10 Provide Calibration Standards
A calibration standard must be provided by the operator to calibrate the analyser. See Chapter 6.2 from
page 82.
Warning
Warning of improper storage
The calibration standard must be stored in a cool place (such as a refigerator).
For the start-up, please use a calibration standard not older than five days.
Notice
Certified calibration standards can be sourced directly from LAR to minimise
overhead.
For more information please contact the Sales Department of LAR
(Chapter 15 on page 283).
!
i
To Next Page
Loading...