LAR Process Analysers QuickTOC ultra - 9.3 Proceed Analogously to the Replacement of the Soda Lime in Chapter 9.2.7.1 From Page 213 Flowsampler; Flowsampler DN25; Flowsampler DN17

220 Instruction Manual QuickTOC
®
ultra
IECEx 12E5119
9 Accessories and Options
9.3 Proceed analogously to the replacement of the soda lime in Chapter 9.2.7.1 from page 213FlowSampler® LAR | PRO-
9.3.3 FlowSampler
®
DN17
• Tube fitting (Sample Inlet and Outlet): DA = 20 mm
• Tube fitting (Analyser Outlet): DA = 32 mm
• Required Flow: 0.3 - 1.5 m
3
/h
• Sample backpressure on Outlet: depressurized (max. < 0.2 bar)
Fig. 142: FlowSampler
®
DN17
4
5
7
6
1
2
1 Sampling Pipe (Needle)
2 Analyser Outlet In (depressurized)
3 Tube fitting (DA=20 mm)
4 Sample Inlet
5 Window
6 Sample Outlet (DA=20 mm)
7 Tube fitting (DA=32 mm)
8 Analyser Outlet Out
3
8