LAR Process Analysers QuickTOC ultra - Care and Maintenance Actions (Auto-TIC-Port)

242 Instruction Manual QuickTOC
®
ultra
IECEx 12E5119
9 Accessories and Options
9.11 Auto-TIC-Port LAR | PROCESS ANALYSERS AG
9.11.3 Care and Maintenance Actions (Auto-TIC-Port)
Only minor effort is required to service and maintain the Auto-TIC-Port. This section shows the best way
to look after your Auto-TIC-Port to guarantee trouble-free operation. The documentation of maintenance
and service work is a precondition for any warranty and guarantee claims, and also represents a valuab-
le aid in locating resolutions when malfunctions occur (Chapter 10 from page 249).
Table 30: Visual Inspection Log (Auto-TIC-Port)
Interval Visual Inspection Criteria OK Action
6 Months
Micro-switch on
Auto-TIC-Port
• Ease of movement of
the closing and
opening function
• Observance of the
minimum distance

 Contact support
_____________________
_____________________
Date: Signature:
Table 31: Care and Maintenance Log (Auto-TIC-Port)
Interval Action
Kind of
Action
OK Comment
1 Month
Replace needle guide seal Maintenance 
Clean needle guide Care 
3 Months Clean and oil the Auto-TIC-Port Care 
Date: Signature:
Notice
A corresponding copy of the log is in Chapter 13 from page 265.
If you have any question to visual inspections, please contact your local part-
ner or the Technical Support of LAR (Chapter 15 on page 283).
i