12E5119 Instruction Manual QuickTOC
®
ultra
IECEx 21
3 Product
3.4 Components of the Analyser
LAR | PROCESS ANALYSERS AG
3.3.2 Right-hand Side View of the Analyser
Fig. 7: Right-hand side of the analyser
3.4 Components of the Analyser
To provide you with an overview of the components fitted, this section explains the most important com-
ponents, and their positions and functions in the analyser.
3.4.1 Pump system
Depending on the number of sample streams and the selected measurement method, the number of
pumps, pump type, and position of the pump may vary within the analyser (installed inside or outside).
The following table gives an overview over the types of pump system in the analyser:
Table 2: Location of pumps
1
2
1 Carrier gas outlet
2 Carrier gas outlet