LAR Process Analysers QuickTOC ultra - Sample Stream Settings (Only User Level 3)

12E5119 Instruction Manual QuickTOC
®
ultra
IECEx 111
7 How to Work with the Analyser
7.7 Measurement Settings
LAR | PROCESS ANALYSERS AG
7.7.4 Sample Stream Settings (only User Level 3)
With user level 3, in this view the sample streams can be specified.
Selection of sample stream:
This function can be used to select the sample stream to be processed.
Name of the sample stream:
This function can be used to rename the sample stream.
Samples receiver vessel:
This feature determines which vessel is used as the sample receiver for this sample stream.
Rinsing vessel:
This function determines which vessel is used as the purge vessel for this sample stream.
Check function: Vessel:
This function determines which vessel is used for the check function for this sample stream.
Fig. 76: Sample stream settings