12E5119 Instruction Manual QuickTOC
®
ultra
IECEx 119
7 How to Work with the Analyser
7.8 Service
LAR | PROCESS ANALYSERS AG
Select sample stream (rinse sample tubes):
This function can be used to select the sample stream to be purged.
Sample rinse time (rinse sample tubes):
This value indicates how long the sample tube should be rinsed.
Flush injection system:
This function starts purging the injection system.
Notice
The Purge Sample Tubes and Purge Injector functions can be terminated pre-
maturely using either the Offline button or the Stop button, which appears next
to the function after the function is activated.
i
To Next Page
Loading...