136 Instruction Manual QuickTOC
®
ultra
IECEx 12E5119
7 How to Work with the Analyser
7.10 Calibration LAR | PROCESS ANALYSERS AG
Permitted deviation (user level 3 only):
Calibration vessel (user level 3 only):
This function determines where the calibration vessel is located.
Show calibration archive:
This function takes you to the overview of all calibrations made for this calibration parameter
(Chapter 7.10.1.1 on page 137).
Measurement interval automatic calibration (user level 3 only):
This feature allows you to set the auto-calibration measurement interval and turn Auto Calibration on and
off.
Notice
If you set the "allowed deviation" to 0.0, the calibration with user level 2 can not be
activated..
i
To Next Page
Loading...