What causes slow starter operation in MacDon Farm Equipment?
If the starter on your MacDon Farm Equipment cranks slowly or won't operate, check the battery charge and clean and tighten any loose or corroded connections. Ensure the controls are in NEUTRAL by moving the GSL to NEUTRAL. Also, check the relay and wire connections, and replace the main fuse if it is defective or blown.
Why does my MacDon M105 Farm Equipment lack power?
If your MacDon Farm Equipment engine lacks power, several factors could be responsible. Ensure you are using the recommended oil. Check and service the air cleaner to address any intake air restrictions. Replace the primary fuel filter, and if necessary, replace the secondary fuel filter if it's clogged. High back pressure can also cause power loss, so clean out or replace the muffler. Finally, ensure you are using the proper fuel.
General| Header Type | Draper |
|---|---|
| Cutting Width | Varies with header |
| Weight | Varies with configuration |
| Reel Speed | Variable |
| Transport Width | 4.27 m |
| Required Horsepower | 160 hp (119 kW) |
To Next Page
