What to do if NAC Image Technology SP-642 Digital Camera fails to download image data?
If your NAC Image Technology Digital Camera fails to download image data, try changing the destination drive for the camera image data. Alternatively, delete unnecessary files in the destination drive to free up space.
Why is a checkerboard pattern displayed on the NAC Image Technology Digital Camera monitor?
If a checkerboard pattern is displayed on the monitor of your NAC Image Technology Digital Camera, check the following: * Check if the current frame time is outside the range for the image data. * Ensure the live image was not set to “Do Not Display” in the options.
How to troubleshoot 'Sync Setting Failure' on NAC Image Technology SP-642 Digital Camera during fx camera connection?
If you encounter a “Sync Setting Failure” message during fx camera connection with your NAC Image Technology Digital Camera, check the following: * Check if the IRIG signals are properly connected to the IRIG BOX IRIG IN connector. * Check if the IRIG signals are properly connected to the M-HUB IRIG.IN connector. * Check if the external trigger input is set correctly.
What to do if NAC Image Technology Digital Camera displays “Recording Command Failed”, “Memory Protected” when starting ARM?
If your NAC Image Technology Digital Camera displays “Recording Command Failed” or “Memory Protected” when starting ARM, and recording is not possible, set “All Camera Auto View” to something other than AUTO and set the recording trigger mode to something other than AUTO.
What causes NAC Image Technology Digital Camera video and PC live image display not to update during ARM, preventing recording?
If the video and PC live image display are not updating during ARM, and recording is not possible on your NAC Image Technology Digital Camera, try these solutions: * Set the “Trigger Recording Mode” to “NORMAL” in the “Detailed Settings” dialogue. * Check to make sure the burst signals are correctly input to the connector selected.
How to resolve 'Error Settings' message on NAC Image Technology Digital Camera during TCP/IP connection?
If you receive an “Error Settings” message when pressing the camera connection button during a TCP/IP connection on your NAC Image Technology Digital Camera, try the following: * Open “Network Connections” in the control panel and confirm that the network in use is valid (the status is “Connected”). * Click 'TCP IP Network Optimization' in the Windows Start Menu > Programs > MEMRECAM HXLink. * Remove the setting file "NicConfig.ini", re-try "TCP IP Network Optimization", and reboot the computer.
What to do if NAC Image Technology SP-642 Digital Camera is unable to VIEW?
If your NAC Image Technology Digital Camera is unable to VIEW, try these solutions: * Connect the camera head to port 2 or connect the camera with the port 2 configuration. * Confirm that the camera is not in use and click “Stop” to delete the warning shown on the video.
How to download images larger than 4GB from NAC Image Technology Digital Camera?
To download images larger than 4GB from your NAC Image Technology Digital Camera, change the file system format to NTFS.
How to fix NAC Image Technology SP-642 recording time mismatch with IRIG signals?
If the recording time does not match the time of the IRIG signals on your NAC Image Technology Digital Camera, verify these settings and connections: * Check if the “HX, GX Camera Time” setting is the “IRIG?M-HUB Time”. * Ensure IRIG-B signals are properly connected to the respective connectors (camera, GX-HUB, M-HUB). * Check if the “fx Camera Time” setting is the “IRIG Time”.
Why video display or PC live image doesn't work on NAC Image Technology Digital Camera GX during VIEW/ARM or has noise?
If the video display or the PC live image isn't working or has noise on your NAC Image Technology Digital Camera GX during VIEW/ARM, try the following: * Set “Sync HX, GX Camera” to “Internal Sync” in the “Options” dialogue or under the “Sync Settings” tab in the “Camera Connections Settings” dialogue. * Check if the EST signals are properly input into the connector specified in “Input/Output Settings” in the options dialogue. * Check if the shutter speed for the recording parameters is set slower than the EST signal frequency.
General safety precautions and warning symbols for device handling and use.
Details on the industry safety alert symbol and its usage for important operational information.
Details the core functionalities of the HXLink software, including camera control and file playback.
Provides a visual flowchart illustrating the general workflow and operations within the HXLink software.
Describes various file types supported by HXLink, including camera data, MCFF, CIF, AVI, TIFF, BMP, and JPEG.
Guides users through configuring PC network settings, specifically IP address settings for camera control.
Details the step-by-step process for installing HXLink, including prerequisite software like Visual C++ and GigE Vision Filter Driver.
Provides specific configuration steps for connecting fx cameras using FC-AL or Gbit (iSCSI) interfaces.
Explains how to properly uninstall the HXLink application and associated drivers from Windows.
Guides on starting the HXLink application and introduces the basic and expert modes of the GUI.
Details the main parts of the HXLink interface, including toolbars, status bars, and their functions.
Explains how to use zoom, scroll, reverse, and rotate functions for image display.
Instructions on registering cameras with HXLink, including setting nicknames, IP addresses, and types.
Details the procedures for connecting HX, GX, Q, and fx cameras, including connection methods and configuration.
Covers the essential operations of recording, confirming images, and playback controls within HXLink.
Explains various recording parameters such as frame rate, trigger modes, exposure timing, and sensor gain.
Configures connection parameters and lens control settings for cameras at the start of connection.
Sets camera time and synchronization timing for HX, GX, Q, and fx cameras for synchronized recording.
Sets camera exposure timing relative to recording synchronization signals for HX, GX, Q, and fx cameras.
Switches the camera frame absolute time display, affecting trigger and exposure calculations.
Configures the display of live camera images, including method and monitor output settings.
Sets input/output signal parameters for HX, GX, and Q cameras, including trigger and sync signals.
Configures settings for displaying superimposed information (OSD) on the video output of HX and GX cameras.
Enables or disables warnings displayed on video and PC warning windows for various camera conditions.
Sets up lens control for the HX camera when an EF mounting adapter is connected.
Explains HXLink program settings and batch settings for connected cameras via the Options window.
Customizes the HXLink graphical user interface, including operational modes and display settings.
Specifies input, save, snapshot, and conversion setting file destination folders within HXLink.
Sets the method for converting images from MCFF format, detailing four available conversion algorithms.
Configures miscellaneous HXLink options like display warnings, edit comments, and shortcut keys.
Switches the camera connection method for HX, GX, Q, and fx cameras.
Configures the display of live camera images, including method and monitor output settings.
Configures settings related to camera data download, including number of cameras and save ranges.
Sets input/output signal parameters for HX, GX, and Q cameras, mirroring Camera Connection Settings.
Configures camera time and sync time for HX, GX, Q, and fx cameras for synchronized recording.
Sets camera exposure timing relative to recording synchronization signals, mirroring Camera Connection Settings.
Switches the camera frame absolute time display, mirroring Camera Connection Settings.
Configures settings for displaying superimposed information (OSD) on HX and GX cameras, mirroring Camera Connection Settings.
Enables or disables warnings displayed on video and PC warning windows for HX, GX, and Q cameras.
Sets the number of days to save communication log files between cameras and the PC for maintenance.
Configures HX camera black balance auto-update and auto view settings for HX and GX cameras.
Registers FCV files for automatic format conversion when opening MCFF or CIF files.
Sets the default conversion format for camera image files (MCFF), including AVI, TIFF, and JPEG.
Switches absolute time display for MCFF frames, reflecting property time for superimposed information.
Lists and briefly describes various recording methods supported by HXLink, including sync and trigger types.
Details settings for recording synchronized to an exposure start signal (external sync recording).
Describes connections and settings for sync recording using IRIG-B signals and trigger signals across multiple cameras.
Explains connections and settings for sync recording with HX and GX cameras using the GX-HUB without IRIG-B.
Details connections and settings for sync recording combining Qcam, HX, GX, and fx cameras via M-HUB or GX-HUB.
Describes event recording, which saves events when the trigger signal is ON, with precautions for usage.
Explains burst recording, which saves images when the burst signal is ON, with precautions for usage.
Describes DUAL recording, a method for simultaneously recording high and low speeds using two segments.
Details multi trigger recording and how to specify download ranges for recorded blocks.
Covers high resolution, high speed recording using multiple HX, GX, Q cameras with exposure phase shift.
Explains long term recording using multiple HX and GX-8 cameras with post trigger functionality.
Details setting exposure timing with trigger signals for HX and GX-8 cameras, including trigger reset limitations.
Describes the frame straddling function for recording two images with a very short time separation for PIV.
Explains connection methods for sync recording of Q cameras, including synchronization with HX, GX cameras.
Describes using the TRIG OUT signal to output recording triggers for cameras and other instruments.
Guides on setting recording methods and parameters via the recording menu, including sync and I/O signal settings.
Details operations available in the File menu, such as opening files, cameras, and data cartridges.
Explains items available in the View menu for controlling toolbar visibility and image display settings.
Describes functions available in the Control menu for camera items, including resolution and camera control.
Details menu options for adjusting image quality, such as gain, white balance, and RGB matrix correction.
Provides settings for cropping, superimposing information, and image conversion for MCFF files.
Covers Sync Display menu options for synchronizing images and Settings menu for camera registration and options.
Explains Help menu for version info and Image Monitor right-click menu for camera and file item actions.
Introduces the HXUtility tool and its startup process for managing HX, GX, and Q cameras.
Guides on setting video format (NTSC/PAL) and IP addresses for HX, GX, and Q cameras.
Explains how to revert HX and GX cameras to factory default settings, noting data loss.
Describes how to initialize and erase camera correction data stored in the GX-5/GX-5F DRP.
Details switching the GX-5 camera configuration mode between manual and automatic settings.
Provides instructions on how to reboot HX and GX cameras using the HXUtility.
Guides on updating the firmware for the remote control (J-PAD3) connected to the GX camera.
Explains how to set a password in HXUtility to prevent erroneous changes to camera settings.
Details initializing ULTRA Cam settings, including retrieving RGB gain and calculating color temperature W/B.
Describes how to set the monitor resolution for HX cameras connected to the system.
Introduces the batch conversion software as a tool for collective format conversion of MCFF files.
Outlines limitations for batch conversion software, including source file types and specific file format restrictions.
Provides step-by-step instructions for performing batch conversion operations using the software.
Explains the auto conversion function that monitors and converts files based on created settings.
Details the process of converting a series of BMP files into a single AVI file using the software.
Introduces the auto pilot function on HX and GX cameras for automated processing upon power-up.
Describes the process of creating auto pilot sequences using the GXAPCmdEdit program.
Details the commands used in auto pilot sequences, including STOP, VIEW, ARM, REC, PLAY, LOOP, and UPDATE_DRIVE.
Introduces the two measurement functions: Coordinate Measurement and LAA Measurement.
Explains how to perform coordinate measurements on images, including setting origin points and saving data.
Describes LAA measurement for length, area, angle, speed, and movement in video files.
Guides on how to start LAA measurement, including image quality adjustments and using the Measure button.
Details the 'Measure' tab for calibration, length, speed, area, and angle measurements.
Provides application examples for LAA measurement, focusing on rotation angle and angle speed determination.
Introduces common issues and solutions that may arise during HXLink use, including camera connection problems.
Addresses 'Error Settings' messages for TCP/IP and FC-AL connections, and general connection failures.
Covers 'Sync Setting Failure', 'Camera Unable to VIEW', and video/PC live image display problems.
Troubleshoots problems related to image download failures, insufficient free space, and large file downloads.
Addresses issues like checkerboard patterns, image quality not reflecting adjustments, and DRES mode effects.
Resolves problems with AVI conversion, NVIDIA driver compatibility, missing text, and conversion algorithm errors.
Explains issues when HX camera segments are set to 'download reservation' and cannot be recorded.
Lists the minimum PC hardware and software requirements for operating HXLink.
Provides a list of camera models that are compatible with the HXLink software.
Lists standard shortcut keys for common operations within the HXLink application.
Details shortcut keys specifically for camera and file operations within HXLink.
Describes the structure and parameters of FCV files used for format conversion settings.
Details parameters for superimposing information and cropping/rotation settings in FCV files.
Explains image quality settings like Gain, Gamma, Chroma, and White Balance configurable via FCV files.
Lists items relevant for batch conversion of files, including file types and compression settings.
Describes the structure of PRM files and common parameters for HX, GX, and Q series cameras.
Lists parameters specific to Q Cameras, including low light, image rotation, and sync settings.
Details the format and sections of lens control settings files, including keys for zoom, focus, and aperture.
Provides step-by-step instructions for installing the FC-AL host bus adapter driver on Windows 8.
A comparative table showing function support (supported, limited, not supported) across GX, HX, and Q cameras.
General| Brand | NAC Image Technology |
|---|---|
| Model | SP-642 |
| Category | Digital Camera |
| Language | English |
To Next Page