Oce ColorStream - Setup Menus

'Setup' menus
'Setup' menus
In setups, special settings for frequently recurring print requests can be grouped together
and saved. By loading a setup, the printing system can be configured quickly with the
right parameters for a print request.
If the printing system is powered up and it is not possible to load a setup, then the settings
from before the printing system was powered down continue to apply.
'Overview of loaded setups'
Display of all currently loaded setups. If the current settings have been changed since the
time when the setup was loaded, this is also displayed.
On the 'Color setup', the Color Setup Verification ID ('CSVID') is displayed in addition
to the name. Whether or not the 'CSVID' is displayed decimally or hexadecimally depends
on the setting in the 'Emulations' menu -> 'General' -> 'Display of CSVID'.
If the relevant channel is available, information on the channel setup is also displayed.
'Job setup' Menu
Displays generally valid print job parameters.
A job setup can also be linked to a color setup.
'Color setup' menu
Display of parameters for the colors currently used in the printing system (including
black).
In color setups, parameters for the colors currently used in the printing system can also
be loaded and saved. The color setups are independent of the job setups.
Menu 'Setup channel A' / 'Setup channel B' / 'Setup channel C'
Display of setups for 'Channel A', 'Channel B' or 'Channel C'.
Channel-specific settings for frequently recurring print jobs can be combined into a
channel setup and saved under a name. By loading a setup of this type, the printing system
is automatically set up with the corresponding parameters for the print job.
Chapter 4 - Description of the Operator Panel 101
'Setup' menus