Cleaning the Paper Output
Caution:
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger toner quantities, the industrial vacuum cleaner must
be explosion-proof.
Caution:
Before cleaning, observe the safety directives in the ‘Cleaning the Printing System —
Overview’ on page 268 section.
To Clean the Paper Output
#
Proceed as follows:
If the printing system has not yet stopped, click the 'Stop' button.1.
On the operator panel, select the following menus and elements:
■
'Replace consumables' -> 'Cleaning the printing system' menu
■
'Select cleaning function': 'Clean paper output'
■
Click the 'Next' button.
2.
Chapter 7 - Cleaning the Printing System286
Cleaning the Paper Output
To Next Page
Loading...
