Oce ColorStream - Replacing Consumables - Overview

Replacing Consumables — Overview
Replacing consumables
This section describes in detail all the steps required to replace consumables. It also provides
the order numbers and package units for all consumables.
Overview
Note:
An error message in the operator panel notifies you that it is time to replace a consumable.
If the consumable is not replaced before a particular number of pages are printed, the
printing system stops and displays an error message. The consumable must then be re-
placed.
You will find information on the following topics:
■
‘Order Numbers and Packing Units’ on page 313
Toner:
■
‘Toner Bottle Identification with Océ TonerSafe’ on page 314
■
‘Toner Supply with Additional Colors’ on page 317
■
‘Refilling Toner (Standard: 6 kg / 13.2 lb Toner Bottle)’ on page 318
■
‘Refilling Toner (Option: 1 kg / 2.2 lb Toner Bottle)’ on page 324
■
‘Replace waste toner box’ on page 331
■
‘Filling a Toner Box’ on page 335
Developer:
■
‘Replacing the Developer - Overview’ on page 336
Chapter 8 - Replacing Consumables312
Replacing Consumables — Overview