Oce ColorStream - Operator Attention Light (Opal);Bundle 11 Version

Operator Attention Light (OPAL)/Bundle 11 Version
Displays
The most important displays are summarized in the following table:
#
MeaningDisplay
The printing system is in standby mode.
(Main switch is on).
(off)
Print data is available; the printing process has started.
(green)
The printing system is in the 'Stop' or '... getting Ready' status.
(slowly flash-
ing green)
The printing system is in 'Ready' or 'Energy saving mode ready'
status (if the fuser station has cooled down from the operating
temperature).
(flashing
green)
■
There is a warning in the 'Stop' status.
■
One of the 'Special functions' is being executed.
■
One of the 'NPRO', 'ADVF', 'ADVR', 'Eject' or 'Autofeed' keys
has been pressed.
■
A software update is being executed.
■
The printing system is being powered off.
(yellow)
There is a warning in the 'Ready' status.
(flashing yel-
low)
Chapter 3 - Description of the Printing System 73
Operator Attention Light (OPAL)/Bundle 11 Version