Changing language/'User profile' tab
Introduction
The operator panel language can be selected in the 'User profile' tab. The appearance of
the operator panel cannot be changed for the user groups "Operator" and "Key Operator."
To change the language
#
Proceed as follows:
Click on the 'General' -> 'User' -> 'User profile' menu.1.
Click on the 'User profile' tab.2.
Select the desired language from the 'Language' list.3.
Click on the 'Apply' button.4.
Chapter 5 - Working with the Operator Panel 119
Changing language/'User profile' tab
To Next Page
Loading...
