Oce ColorStream - Replace Consumables Menus

'Replace consumables' menus
'Changing consumables' menus
The sub-menus contain the procedures for replacing consumables and expendables and
for cleaning the printing system. A menu for identifying the toner used is also available.
'Expert mode' menu
Procedure for replacing several expendables. As the necessary preparation and completion
phases for replacing expendables are only executed once in expert mode, the time required
is significantly reduced.
'Replace belt' menu
Procedure for:
■
Replacing the photoconductor belt and the photoconductor blade in the upper or
lower print unit
■
Replacing the transfer belt in the upper or lower print unit
■
Running in a photoconductor belt or transfer belt.
'Replace brush' menu
Procedure for replacing the cleaning brush of the photoconductor or transfer unit in the
upper or lower print unit.
'Replace corotrons' menu
Procedure for replacing the cleaning, charge and reload, and recharge corotrons of the
photoconductor or transfer unit in the upper or lower print unit.
'Replace fine filter' menu
Procedure for replacing the fine filter.
'Replace developer' menu
Procedure for refilling or draining the developer in a developer station of the upper or
lower print unit.
Chapter 4 - Description of the Operator Panel102
'Replace consumables' menus