Oce ColorStream - Applying or Resetting Settings

Applying or resetting settings
'Apply' / 'Reset'
If you change parameters in a menu, you have to save these changes before switching to
another menu.
#
FunctionButton
The current settings in the displayed menu are saved.'Apply'
The current settings in the displayed menu are not saved, the settings
before the changes were made are restored.
'Reset'
Query
If you switch to another menu without applying the changed parameters, the 'Save current
changes?' query is displayed:
#
FunctionButton
The parameters are saved.
The new menu is opened.
'Yes'
The parameters are not saved; the parameters in place before the
change are restored.
The new menu then opens.
'No'
The parameters are not saved.
The menu remains open.
'Cancel'
Chapter 5 - Working with the Operator Panel122
Applying or resetting settings