Oce ColorStream - Buttons and Displays in the Left Area

Buttons and Displays in the Left Area
Function of the Buttons
Note:
The function of the buttons corresponds to the function of the keys on the printing
system's additional operator panels.
#
FunctionButton
Switches the printing system to ready for operation
again from the 'Stop' or 'Operator intervention neces-
sary' statuses.
Requirements:
■
No errors present
■
Controller and system control are ready
'Ready'
Moves the paper slowly forwards without fusing while
the button is being pressed. The paper speed increases
the longer you press the button. However, synchroniza-
tion is lost.
Requirement:
■
This function can only be executed in the 'Stop'
status.
'ADVF'
= ADVanced
Forward
Moves the paper slowly backwards without fusing while
the button is being pressed. The paper speed increases
the longer you press the button. However, synchroniza-
tion is lost.
Requirement:
■
This function can only be executed in the 'Stop'
status.
'ADVR'
= ADVanced
Reverse
Moves the last printed pages out of the printing system
with the correct page alignment. Already printed pages
will still be fused. If required, the NPRO transport can
be canceled using the 'Stop' key.
Requirement:
■
This function can only be executed in the 'Stop'
status.
'NPRO'
= Non Process
Run Out
Chapter 4 - Description of the Operator Panel84
Buttons and Displays in the Left Area