Oce ColorStream - Page 85

FunctionButton
Transports the paper web forward at print speed while
the button is pressed. The paper web is not printed.
Already printed pages will still be fused.
Requirement:
■
This function can only be executed in the 'Stop'
status.
'Eject'
Moves the autofeed clamp to paper input position
or
Starts feeding the paper web into the printing system
'Autofeed'
Switches the printing system to 'Stop' status
or
Cancels a function that is running
'Stop'
Display
#
FunctionDisplay
Gray background:
Indicates that currently no print data has been transferred from the
host.
'Data ready'
Green background:
Indicates that print data has been transferred from the host.
Gray background:
Standard display (no controller restart).
'System'
'Restart'
Red background:
Indicates that the controller is performing a restart.
If this display appears, the print data transmission from the host
must be repeated, as proper printing or fusing of the last pages is
no longer guaranteed against errors.
Chapter 4 - Description of the Operator Panel 85
Buttons and Displays in the Left Area