Refilling Toner (Standard: 6 kg / 13.2 lb Toner Bottle)
Caution:
■
Do not allow toner to come into contact with the eyes. In the event of contact with
the eyes, rinse eyes with plenty of cold water and seek medical attention.
■
Avoid contact with the skin. In the event of contact with the skin, wash toner off with
plenty of cold water.
■
Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner, you experi-
ence symptoms such as nausea, headaches or dizziness, go out into the fresh air imme-
diately.
■
Do not spill toner. You can slip on spilled toner. Clean up spilled toner or developer
immediately using a damp cloth or vacuum cleaner. Do not use warm water as it
makes the toner soft and sticky.
■
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger toner quantities, the industrial vacuum cleaner
must be explosion proof.
■
Keep toner out of the reach of children and store it away from containers used for
food and drink.
Attention:
■
Only use permitted toner that is suitable for the developer being used.
■
Only use original, sealed toner bottles secured by an intact band.
■
Do not re-use toner.
■
Always store toner in a cool (< 35° C/95° F), dry, and well-ventilated space.
■
Never expose toner to direct heat (sunlight, heaters, etc.)
Note:
Toner can be refilled during print operations. Depending on the print image, you still
have a few minutes after the warning is displayed before the printing system stops due
to lack of toner.
To Refill the Toner (Standard: 6 kg / 13.2 lb Toner Bottle)
#
Proceed as follows:
Open the doors on the console.1.
Chapter 8 - Replacing Consumables318
Refilling Toner (Standard: 6 kg / 13.2 lb Toner Bottle)