Deleting Resources
Requirement
The Key Operator or an operator authorized by the Key Operator must be logged on.
To Delete a Resource
#
Proceed as follows:
If the printing system has not yet stopped, click the 'Stop' button.1.
On the operator panel, select:
■
For I mode:
'Configuration' -> 'Emulations' -> 'I mode' -> 'Resource management' menu
■
For PCL mode:
Menu path 'Configuration' -> 'Emulations' -> 'PCL mode' -> 'Resource
management'
■
For colors:
'Configuration' -> 'Color' -> 'Resource management' menu
2.
Under 'Current', select one or all resources of one type and click on the 'Delete'
or 'Delete all' button.
3.
Chapter 5 - Working with the Operator Panel132
Deleting Resources
To Next Page
Loading...
