Setting language/'User profile' tab
Introduction
The operator panel language can be selected in the 'User profile' tab. The appearance of
the operator panel cannot be changed for the user groups "Operator" and "Key Operator."
To set a language
#
Proceed as follows:
Click on the 'General' -> 'User management' -> 'Edit user' menu.1.
Select the User.2.
Click on the 'User profile' tab.3.
Select the desired language from the 'Language' list.4.
Click the 'Apply' button.5.
Chapter 5 - Working with the Operator Panel114
Setting language/'User profile' tab
To Next Page
Loading...
