Operating the Printing System — Overview
Operating the printing system
This section describes how to power the printing system on and off and the procedure
for inserting, affixing and removing the paper web, and also contains all other information
that you will need to operate the printing system.
Overview
You will find information on the following topics:
■
‘Powering on the Printing System’ on page 139
■
‘After printing has stopped, switch the printing system back to 'Ready' ’ on page 142
■
‘Inserting the Paper Web’ on page 143
■
‘Affixing the paper web’ on page 152
■
‘Removing the paper web ’ on page 155
■
‘Opening or Closing the Doors on the Printing System — Overview’ on page 156
■
‘Replacing the developer station — overview’ on page 165
■
‘Checking the print image ’ on page 199
■
‘Printing Test Print Jobs — Overview’ on page 200
■
‘Optimizing the Color Printing — Overview’ on page 239
■
‘Correcting Color Separation Shifts’ on page 255
■
‘Calibrating the Data Integrity Mark Sensor’ on page 257
■
‘Converting the Printing System’ on page 261
■
‘Emptying Condensation Water’ on page 263
■
‘Switching off the Printing System’ on page 264
Chapter 6 - Operating the Printing System138
Operating the Printing System — Overview
To Next Page
Loading...
