Oce ColorStream - Add User

'Add user'
To add a user
#
Proceed as follows:
Click on the 'General' -> 'User management' -> 'Add user' menu.1.
Select user template.
The settings for this user template will be adopted for the new user. These set-
tings can then be adjusted in the 'User management' -> 'Edit user' menu if
necessary.
2.
Enter a name for the new user. The following characters are permitted:
■
A-Z
■
a-z
■
0-9
■
Underscore, hyphen, space
3.
Click on the 'Create' button.4.
Enter a new password, confirm password and then click on 'OK'.
The password can contain any number of characters if the "Extended password
protection" function was not activated by Service.
Extended rules will apply to the password if Service has activated the "Extended
password protection" function. see ‘Extended password protection (option)’ on
page 109.
5.
Chapter 5 - Working with the Operator Panel110
'Add user'