Oce ColorStream - Cleaning the Paper Brake Dust Filter

Cleaning the Paper Brake Dust Filter
Caution:
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger toner quantities, the industrial vacuum cleaner must
be explosion-proof.
Caution:
Before cleaning, observe the safety directives in the ‘Cleaning the Printing System —
Overview’ on page 268 section.
To Clean the Paper Brake Dust Filter
#
Proceed as follows:
If the printing system has not yet stopped, click the 'Stop' button:1.
Undo the knurled screw, unlock
the cover plate in the direction
of the arrow and remove.
2.
Chapter 7 - Cleaning the Printing System 305
Cleaning the Paper Brake Dust Filter