Oce ColorStream - Menu Tree; Menu Tree - Overview

Menu Tree
Menu Tree — Overview
Note:
The menus displayed in the menu tree depend on the different rights for the individual
user categories.
This documentation describes all menu options normally set up for the user categories
"Operator" and "Key operator".
Information on the Paper Path Manager can be found in Help in the printing system
operator panel. Information on the Web Buffer can be found in Help in the printing
system operator panel and in the Océ Web Buffer user guide.
Main Groups
You can call all the menus through the menu tree. The menus are arranged into main
groups, e.g.:
■
[00] 'General'
You can define user settings valid for the entire print processing unit in these menus.
■
[02] 'ColorStream'
You can set the relevant parameters for the Océ ColorStream printing system in these
menus.
■
[BU] 'Web Buffer'
You can set the relevant parameters for the paper web buffer in these menus.
■
[FF] 'Paperpath Manager'
In these menus, you can gain an overview of all UP3I-capable devices of the print
processing unit.
■
[xx] Any additional device for paper pre-print processing and/or post-print processing.
The numbers before the main groups (= 'Paper sequence ID') are required to identify the
devices in the print processing unit.
Navigation
Clicking the switches in the menu tree lets you show or hide other menu levels, e. g.:
Chapter 4 - Description of the Operator Panel 91
Menu Tree — Overview