Oce ColorStream - Cleaning the Toner Suction System

Cleaning the Toner Suction System
Caution:
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger toner quantities, the industrial vacuum cleaner must
be explosion-proof.
Caution:
Before cleaning, observe the safety directives in the ‘Cleaning the Printing System —
Overview’ on page 268 section.
To Clean the Toner Suction System
#
Proceed as follows:
If the printing system has not yet stopped, click the 'Stop' button.1.
Open the doors on the console.2.
Use the handle to pull the toner
bottle holder out.
3.
Chapter 7 - Cleaning the Printing System 301
Cleaning the Toner Suction System