CE Mark
Océ ColorStream
The printing system Océ ColorStream fulfills the requirements of the EC directives
89/336/EWG, "Electromagnetic Compatibility" and 73/23/EWG "Low Voltage Direc-
tive".
The CE Mark indicates that the printing system complies with these EC directives.
The printing system is a Class A product (EN 55022). This product may cause radio in-
terference in a domestic environment. In this case, the agent may be required to take ap-
propriate measures to correct the interference at his or her own expense.
The printing system can cause the power supply to fluctuate if the power network is not
in order. According to EN 61000-3-11, the printing system should only be used on
premises that have a network with a continuous current-carrying capacity of 100 A per
phase or are supplied by a distribution network of 400/230 V.
The agent must ensure that the printing system is operated in a power supply network
that meets these requirements. If necessary, consult the power company to ensure that
the continuous current-carrying capacity of the power system at the connection point to
the public power grid is sufficient to connect the device.
Connected Devices
The optional "maintenance cart for developer stations" and "movable developer station
shelf" are also CE-certified.
All other devices that are connected to the printing system must also comply with the
requirements set forth in the relevant EC directives.
Chapter 2 - Safety48
CE Mark
To Next Page
Loading...
