Oce ColorStream - Page 287

Proceed as follows:
Caution
The flap of the paper output opens automatically.
Do not stand directly in front of the flap.
#
Click the 'OK' button to start
cleaning the paper output.
The flap on the paper output is
opened.
3.
For information on the icons displayed on the operator panel under 'Steps':
see ‘Explanation of icons’ on page 134.
Using a dry cloth, carefully clean
the following:
■
Both tension rollers and all
pressure rollers (turn the
rollers to ensure complete
cleaning)
■
Paper movement sensor (turn
the wheel to ensure complete
cleaning)
■
Data integrity sensor
4.
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For larger toner quantities, the industrial
vacuum cleaner must be explosion-proof.
Chapter 7 - Cleaning the Printing System 287
Cleaning the Paper Output