Test Print Job "ColorProof.pcl"
Test Print Job 'ColorProof.pcl' — Overview
Introduction
The ColorProof test print jobs can be used to test the color functionality of the controller.
The 'ColorProof.pcl' test print job is designed for 'PCL mode'.
Each test page contains information on the current configuration of the printing system
in the left-hand margin.
Note:
The first 11 test pages are a minimum of 12 x 17 inches in size. If the paper size is set
smaller than this minimum size, the test printout will be cut off at the bottom and right-
hand margins. If necessary, the font test from page 12 is continued on the following
page.
Overview
You will find information on the following topics:
■
‘Test Print Job 'ColorProof.pcl' — Page 1’ on page 228
■
‘Test Print Job 'ColorProof.pcl' — Page 2’ on page 230
■
‘Test Print Job 'ColorProof.pcl' — Page 3’ on page 231
■
‘Test Print Job 'ColorProof.pcl' — Pages 4-10’ on page 232
■
‘Test Print Job 'ColorProof.pcl' — Page 11’ on page 234
■
‘Test Print Job 'ColorProof.pcl' — Page 12’ on page 236
Chapter 6 - Operating the Printing System 227
Test Print Job 'ColorProof.pcl' — Overview