Proceed as follows:
Pull the locking lever upwards
and open the lock.
4.
Remove the empty toner bottle.5.
Note
Only use permitted toner suitable for the developer being used (see ‘Order
Numbers and Packaging Units for Expendables’ on page 349).
Tip the new toner bottle of the
same toner type briefly down-
wards and upwards once, then
remove the adhesive tape.
6.
Screw the lid of the new toner bottle onto the empty toner bottle.7.
Chapter 8 - Replacing Consumables320
Refilling Toner (Standard: 6 kg / 13.2 lb Toner Bottle)
To Next Page
Loading...
