Proceed as follows:
Caution
The inserted toner bottle is then
checked.
The LED beside the toner bottle
holder (white arrow) indicates
whether the inserted toner bottle
contains the correct toner type
and whether the toner suction
head is locked:
■
Green
Toner bottle identified and
toner suction head locked.
Continue with step 9.
■
Yellow
Toner suction head not
locked. Check that the toner
bottle has been fitted correct-
ly. Then repeat step 8.
■
Flashing yellow
Toner bottle empty. Repeat
procedure from step 2.
■
Red
The toner bottle could not
be identified. No toner bottle
has been inserted or the
transponder on the toner
bottle is faulty or not present,
or the reader is faulty. Cor-
rect the problem according
to the information in the er-
ror message displayed on the
operator panel.
Chapter 8 - Replacing Consumables322
Refilling Toner (Standard: 6 kg / 13.2 lb Toner Bottle)
To Next Page
Loading...
