Proceed as follows:
Open the door on the filter
module.
2.
Pull the locking lever down and
tip the waste toner box forward
to the stop point.
3.
Remove the lid from the empty
toner bottle and screw it onto
the full toner bottle.
Remove the full toner bottle.
4.
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For larger toner quantities, the industrial
vacuum cleaner must be explosion proof.
Chapter 8 - Replacing Consumables332
Replace waste toner box
To Next Page
Loading...
