system. The life cycle of the filter system is designed so that it does not have to be replaced
during the lifetime of the printing system.
During printing, the ozone concentration is below the maximum allowable work place
concentration (MAC) of 0.1 ppm (0.2 mg/m
3
). With proper ventilation, harmful con-
centrations do not occur even if the filter system fails entirely. For ventilation, see ‘Cooling
air, fresh air, and air purity’ on page 502.
Consumables and Expendables
Observe the safety directives given in the manual for:
■
Toner
■
Developer
■
Fine filter
■
Photoconductor belt
■
Transfer belt
■
Cleaning agent
Keep all consumables for the printing system out of the reach of children. Store consum-
ables away from containers used for food and drink.
Optical wave guide
If your printing system has an optical wave guide connection:
Never look directly down a glass fiber cable or glass fiber cable connection. The laser
beams in fiber optic devices can injure your eyes.
Laser
If the printing system includes a laser:
Never look directly into a laser beam or laser optics. Never move a tool into the area of
the laser beam so that you do not unintentionally diffract the laser beam. The laser beams
in fiber optic devices can injure your eyes.
Remote control via LAN
If you operate the printing system from a remote operator panel:
The access ticket ensures that only one user at a time can access the printing system.
Warning and Information Signs
Observe all warning and information signs on and in the printing system (see ‘Warning
and information signs’ on page 35).
Chapter 2 - Safety 41
Operation
To Next Page
Loading...
