Proceed as follows:
Pull handle of the corotron slide-
in unit and swivel corotron slide-
in unit up.
5.
Caution
Do not touch or damage the corotron wires.
Wear the gloves provided in the packaging.
Remove corotron slide-in unit.6.
Place the corotron slide-in unit
with the corotron wires facing
upwards on a table.
7.
‘Replacing corotron wire’ on page 428.8.
Chapter 9 - Replacing Expendables422
Removing the reload corotron slide-in unit of the transfer unit
To Next Page
Loading...
