Proceed as follows:
Close door.13.
Indicate on the operator panel whether a new fine filter was installed:
■
When you click the 'Yes' button:
The message on the operator panel is deleted automatically, the replacement
of the fine filter is recorded in the 'Consumable history' menu and the
consumable counter is reset.
■
When you click the 'No' button:
The consumable counter is not reset.
14.
Complete the fine filter replacement on the operator panel:
■
To carry out further maintenance work directly afterwards, click the 'OK'
button.
The printing system remains in the 'Special functions' status.
■
To complete all maintenance work, click the 'Ready' button.
All printing system assemblies are checked (duration around two minutes),
before the printing system is switched to the 'Stop' status.
To switch the printing system to the 'Ready' status, click the 'Ready' button
again.
15.
Chapter 9 - Replacing Expendables 447
Replacing fine filter
To Next Page
Loading...
