FunctionKey
Moves the paper slowly backwards without fusing while the
button is being pressed. The paper speed increases the longer
you press the button. However, synchronization is lost.
Requirement:
■
This function can only be executed in the 'Stop' status.
ADVR
(= ADVanced
Reverse)
Moves the last printed pages out of the printing system with
the correct page alignment. Already printed pages will still be
fused. If required, the NPRO transport can be cancelled using
the 'Stop' key.
Requirement:
■
This function can only be executed in the 'Stop' status.
NPRO
(= Non Process
Run Out)
Transports the paper web forward at print speed while the
button is pressed. The paper web is not printed. Already printed
pages will still be fused.
Requirement:
■
This function can only be executed in the 'Stop' status.
EJECT
Moves the autofeed clamp to paper input position
or
Starts feeding the paper web into the printing system
AUTOFEED
Switches the printing system to 'Stop' status
or
Cancels a function that is running
STOP
Chapter 3 - Description of the Printing System 71
Additional Operator Panels
To Next Page
Loading...
