[406] Measure Lab value
3. Press [Start].
4. Follow the wizard instructions how to measure the color.
IMPORTANT
If ΔE is larger than 3, you are advised to measure the spot color again.
5. To evaluate the CMYK values, print a patch chart. (
Read the spot color patch chart
on
page 316)
6. Touch [OK].
The spot color is stored in the custom library.
Add CMYK values to a spot color
1. Select the spot color library and search the spot color.
2. Press [Edit].
3. Touch [Add] to add a CMYK value.
4. Select the media family.
The CMYK value for the media family is displayed.
[407] Edit a spot color
Create a spot color from the control panel
Chapter 11 - Manage color definitions
311
To Next Page
Loading...
