Action
4
IMPORTANT
Do not pull the flat cable.
Pull out the registration unit and place it on
a clean flat surface.
5 Pull one leaf spring towards the front side
and at the same time push the other leaf
spring towards the back side to open the
SZ-unit.
6 1. Moisten a cleaning cloth with PML.
2. Use the cloth to moisten the upper and
lower rollers.
Turn the rollers to moisten the complete
surface.
4
Clean the SZ-rollers in the high capacity stacker
Chapter 13 - Maintain the printer
387
To Next Page
Loading...
Need help?
General