Parker AC30 series User Manual

2-2 Introduction
AC30V series Variable Speed Drive
INITIAL STEPS
Use the manual to help you plan the following:
Installation
Know your requirements:
• certification requirements, CE/UL/CUL conformance
• conformance with local installation requirements
• supply and cabling requirements
Operation
Know your operator:
• how is it to be operated, local and/or remote?
• what level of user is going to operate the unit?
• decide on the best menu level for the Keypad (where supplied)
Programming (Parker Drive Quicktool) – pc programming tool
Know your application:
• Install the Parker Drive Quicktool (PDQ) after downloading it from www.parker.com/ssd/pdq
• Connect your pc to your Drive via Ethernet
Commission your Drive with the Parker Drive Quicktool wizard
• Go to Appendix D Parameter Reference for more information
PC REQUIREMENTS
Minimum system requirements:
• 1GB RAM
• 1GHz Pentium
• 1GB free Hard Disk space
• 1024x768 screen resolution
Operating Systems:
• Windows XP
• Windows Vista (32 bit)
• Windows 7 (32 & 64 bit)
• Windows 8 (32 & 64 bit)
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485