Parker AC30 series User Manual

Parameter Reference D-111
AC30V series Variable Speed Drive
Speed Ref
Parameters::Motor control::Speed Ref
This function holds all the parameters concerning the generation of the setpoint reference (reference ramp, speed trim, setpoint reverse, etc.).
PNO Parameter Descriptions
1264 Ref Min Speed Clamp
Minimum value for
Ramp Speed Output
1265 Ref Max Speed Clamp
Maximum value for Ramp Speed Output
1266 Ref Speed Trim
The trim is added to the ramp output to form the Ramp Speed Output (unconditionally in remote mode).
In local mode, it is added is the Ref Trim Local parameter is set to TRUE
1267 Ref Trim Local
When TRUE, the trim is added to the ramp output in local mode.
When FALSE, the trim is not added to the ramp output in local mode.
Functional Description
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485