Parker AC30 series User Manual

12-8 Ethernet
AC30V series Variable Speed Drive
TROUBLESHOOTING THE WEB SERVER
Troubleshooting of the Ethernet in general is described in the section Troubleshooting below.
If the AC30 web page still cannot be accessed then this may be due to the browser’s proxy server settings, especially if the PC has been used
on a corporate network. To check the settings, access the Internet Options dialog from within the browser and click on the Connections tab,
then click on LAN settings. Make sure the Proxy server checkbox is cleared, alternatively click on Advanced and add the IP address of the
AC30 to the Exceptions list.
Contact your network administrator before making any changes to your browser settings.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485