Parker AC30 series - Motor Nameplate

D-66 Parameter Reference
AC30V series Variable Speed Drive
Motor Nameplate
Setup::Motor Control::Motor Nameplate
Parameters::Motor Control::Motor Nameplate
Only available if Induction motor selected in Control Strategy.
In this function you enter the details of the motor under control and any available motor nameplate information.
Refer to Induction Motor Data parameters which are determined by the Auto Tune feature for example the Magnetising Current, Stator
Resistance, Leakage Inductance, Mutual Inductance and Rotor time Constant for model parameters.
Note Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor motor control or Autotune problems
may occur if you do.
PNO Parameter Descriptions
0455 Rated Motor Current
Rated motor current on the name plate
0456 Base Voltage
The rated motor voltage on the name plate
0457 Base Frequency
The base motor frequency on the name plate
0458 Motor Poles
Motor poles on the nameplate
0459 ameplate Speed
Rated motor speed on the name plate
0460 Motor Power
Motor power rating
0461 Power Factor
Motor power factor on the name plate
www.comoso.com