C-1 Compliance  
AC30V series Variable Speed Drive 
Appendix C: Compliance 
 
This Chapter outlines the compliance requirements and product certifications. 
 
 
 
APPLICABLE STANDARDS 
 
EN 61800-3:2004  Adjustable speed electrical power drive systems – Part 3:  EMC requirements and specific test methods. 
EN 61800-5-1:2007  Adjustable speed electrical power drive systems – Part 5-1:  Safety requirements – Electrical, thermal and energy. 
EN 61800-5-2:2007  Adjustable speed electrical power drive systems – Part 5-2:  Safety requirements – Functional. 
EN ISO 13849-1:2008    Safety of machinery – Safety-related parts of control systems – Part 1:  General principles for design. 
EN 60204-1:2006  Safety of machinery – Electrical equipment of machines – Part 1:  General requirements. 
EN 61000-3-2:2006  Electromagnetic Compatibility (EMC) - Part 3-2:  Limits – Limits for harmonic current emissions (equipment input 
current up to and including 16A per phase). 
EN62061:2005 Annex E  Safety of machinery – Functional safety of safety related electrical, electronic and programmable electronic control 
systems 
IEC 61000-3-12:2011  Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for harmonic currents produced by equipment 
connected to public low-voltage systems with input currents >16A and ≤75A per phase.  
EN 61000-6-2:2007  Electromagnetic compatibility (EMC) – Part 6-2:  General standards – Immunity for industrial environments.   
EN 61000-6-3:2007  Electromagnetic compatibility (EMC) – Part 6-3:  General standards - Emission standard for residential, commercial and 
light-industrial environments.   
EN 61000-6-4:2007  Electromagnetic compatibility (EMC) – Part 6-4:  General standards – Emission standard for residential, commercial 
and light-industrial environments. 
UL508C  Standard for Safety, Power Conversion Equipment, third edition. 
CSA 22.2 No.14-10  Industrial Control Equipment. 
NFPA  National Electrical Code, National Fire Protection Agency, Part 70. 
Attention – hot 
surfaces 
DANGER 
Risk of electric shock
 
Caution 
Refer to documentation
 
 
Earth/Ground 
Protective Conductor Terminal