D-118 Parameter Reference
AC30V series Variable Speed Drive
Thermistor
Setup::Inputs and Outputs::Option
Parameters::Option IO::Thermistor
PNO Parameter Descriptions
1184 Thermistor Type
Defines the thermistor type. This is used when generating the MOTOR OVERTEMP trip.
NTC, (Negative Temperature Co-efficient)
PTC, (Positive Temperature Co-efficient)
KTY, (a linear temperature measuring device).
1185 Thermistor Resistance
The resistance measured across the thermistor terminals.
1004 Thermistor Trip Level
Defines the level at which a Motor Over Temperature trip will be generated. The default value is appropriate for PTC and NTC
thermistor types.
To Next Page
Loading...
