Parker AC30 series User Manual

Safety 1-1
AC30V series Variable Speed Drive
Chapter 1: Safety
Safety Information
Please read these important Safety notes before installing and operating this equipment IMPORTANT
CAUTION
CAUTION notes in the manual warn of danger to equipment.
WARNING
NOTES IN THE MANUAL WARN OF DANGER TO PERSONEL
Requirements
INTENDED USERS
This manual is to be made available to all persons who are required to install, configure or service equipment described herein, or any other
associated operation.
The information given is intended to highlight safety issues, and to enable the user to obtain maximum benefit from the equipment.
Complete the following table for future reference detailing how the unit is to be installed and used.
INSTALLATION DETAILS
Model Number
(see product label)
Where installed
(for your own
information)
Unit used as a:
(refer to
Certification)
 Component  Relevant Apparatus Unit fitted:
 Cubicle mounted
 Through Panel Mounted
APPLICATION AREA
The equipment described is intended for industrial motor speed control utilising AC induction motors or AC permanent magnet synchronous
machines.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485