Parker AC30 series User Manual

4-1 Installation
AC30V Variable Speed Drive
Chapter 4: Installation
Read Appendix C: “Compliance” before installing this unit. IMPORTANT
Cubicle Mount
DIMENSIONS FOR CUBICLE MOUNT INSTALLATION
Figure 4-1 Mechanical Dimensions for AC30V Drive - Frame D Illustrated
Models
Max. Weight
H
H1
H2
W
W1
W2
W3
D
Fixings
Frame D
4.5kg (10 lbs)
286.0 (11.26)
270.0 (10.6)
6.5 (0.25)
100.0 (3.93)
80.0 (3.15)
10.0 (0.39)
255.0 (10.0)
4.5mm slots & holes, M4 fixings
Frame E
6.8kg (15 lbs) 333.0 (13.11) 320.0 (12.6) 6.5 (0.25) 125.0 (4.92) 100.0 (3.93) 12.5 (0.49)
255.0 (10.0)
Frame F
10.0kg (22 lbs) 383.0 (15.07) 370.0 (14.5) 6.5 (0.25) 150.0 (5.90) 125.0 (4.92) 12.5 (0.49) 255.0 (10.0)
Frame G
22.3kg (49.2 lbs) 480.0 (18.90) 465.0 (18.31) 7.25 (0.29) 220.0 (8.66) 190.0 (7.48) 13.0 (0.51) 287.0 (11.30) 5.5mm slots & holes, M5 fixings
Frame H
42.8kg (94.6 lbs) 670.0 (26.38) 650.0 (25.59) 10.0 (0.39) 260.0(10.24) 220.0 (8.66) 20.0 (0.79) 316.0 (12.44) 6.8mm slots & holes, M6 fixings
Frame J
89.0kg (196.2 lbs) 800.0 (31.50) 780.0 (30.71) 10.0 (0.39) 330.0(12.99) 285.0(11.22) 23.0(0.91) 142.5(5.61) 374.0(14.72) 9.0mm slots & holes, M8 fixings
All dimensions are in millimetres (inches)
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485