To Next Page

To Previous Page

D-48 Parameter Reference

AC30V series Variable Speed Drive

Graphical Keypad

Setup::Environment

Parameters::Keypad::Graphical Keypad

PNO Parameter Descriptions

1141 View Level

The view level may be used as a convenient method to hide menus and parameters not currently required. The view levels are:

0 Operator – only the “Control Screen”, “Favourites”, “Setup” and “Monitor” menus are visible.

1 Technician – additional menus are visible in the “Setup” and “Monitor” menus

2 Engineer – the “Parameters” menu is visible in addition to the above.

0982 Startup Page

On power-up the GKP briefly displays the drive name, rating and software version. After a short timeout the display automatically

changes to the menu defined here

0 Default

1 Control Screen

2 Favourites

3 Monitor

When Startup Page is set to “Default” the first menu will be:

* The “Control Screen” menu if the drive is in local sequencing mode, otherwise

* The “Favourites” menu if the Favourites menu is not empty, otherwise

* The “Monitor” menu.

0983 Display Timeout

When the GKP is idle, (no keys pressed), for a period longer than the Display Timeout, the display will automatically revert to the

menu defined in the Startup Page parameter.

Setting the Display Timeout to zero defeats this feature.

1142 GKP Password

Defines the password to be entered to allow modification to parameters using the GKP. This password does not affect access via the

web page. A value of 0000, (the default value), inhibits the password feature. Entering a value other than 0000 causes the GKP to

prompt for the password before proceeding to the parameter edit mode.

Once a password has been entered the GKP remains unlocked. To re-lock the password return to the top of the menu tree then

press Soft Key 1.

1097 Password in Favourite

When the GKP Password is active this parameter may be used to selectively defeat the password feature in the Favourites menu. By

default this parameter is FALSE, meaning that the password is ignored when modifying Favourites parameters.

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485

Parker AC30 series User Manual

Other manuals for Parker AC30 series