Parameter Reference D-49
AC30V series Variable Speed Drive
PNO Parameter Descriptions
1098 Password in Local
When the GKP Password is active this parameter may be used to selectively defeat the password feature in the Control Screen
menu. By default this parameter is FALSE, meaning that the password is ignored when modifying the Local Setpoint and other
related parameters.
1099 Technician Password
The password required to change from Operator View level to Technician View Level. If this is zero then no password is required.
1637 Engineer Password
The password required to change from Operator or Technician View level to Engineer View Level. If this is zero then no password is
required.
1143 Version
Indicates the firmware version of the attached GKP.
To Next Page
Loading...
