Installation 4-32
AC30V Variable Speed Drive
Fitting a Remote GKP
When fitting the GKP remotely to either a cubicle or panel mount it must be fitted to a flat surface. Maximum cable length < 3 meters.
To order the GKP separately the part number is 7001-00-00, this includes the connection lead and screws.
If ordered and supplied with the drive the connection lead is not supplied, to order the lead the part number is LA501991U300.
Cut out details:
The yellow dotted line is the cutout
detail to allow remote fitting the
connection lead, also shows screw
hole details.
Use M3 x 10 self tapping screws.
Connection lead RS232/REM OP
STA with a Steward 28A2025-OAO
connector.
All measurements in millimeter.
To Next Page
Loading...
